BESSLER clever creative gifted a showman and Blessed
The blog season is alive and well, and there is much spirited banter back and forth regarding the most simple of ideas.
A wheel in balance cannot turn unless some force is added
I have sat at the edge of my 8 ft wheel and with the twitch of my finger been able to maintain the rotation..... not much input, just a little
the larger wheel, the more power, if the wheel "sees" the excess weight in the right place at the right time
Thanks again to John for his tireless pursuit and patience with us all
I am a Pertuum Mobilist
GRAVITTEA
Monday, December 5, 2016
Sunday, November 20, 2016
A single thought.........
The basic premise of a weight on the wheel, is that the weight can impart its gravitational pull in such a way as to affect the center of gravity of the wheel, depending on its position. The mass of the weight is constant and the pure effect of gravity on the mass (weight) does not change. So, to make a different effect on the wheel a weight must move. There are basics which cannot be ignored.
If a weight is hanging from the axle is has essentially disappeared from the wheel
The farther away from the axle the more effect that the weight has on the wheel in any position other than 12:00 and 6:00
The most power of a weight to effect rotation is at the 9:00 and 3:00 positions
The weight at 12:00 and 6:00 has no rotational power
as the weight moves from 12:00 to 1:00 it has more effect on the wheel
as the weight moves from 1:00 to 2:00 it has a little more effect on the wheel
IF a mass is put at the top of the wheel at the perfect balance point the wheel will not turn, but put it out of the center of balance, the wheel will turn
IF a mass has moved from the top to the bottom the potential energy stored in the mass has not changed only the position
The wheel has its own set of rules, and it will not respond to anything else
A lot of my early work was centered on the energy of the falling mass and its impact, but no net gain seemed to appear, as it is only the mass on the wheel that can effect its rotation or listing over, and in a ship the weights are typically moved below deck from side to side to bring the balance correction that is making the ship list .... lean.... over
So...... the power of the mass or weight is most effective on the rotation at the 3:00 position and as far from the axle as possible the opposite would be the the 9:00 position and close to the axle
GRAVITTEA
The basic premise of a weight on the wheel, is that the weight can impart its gravitational pull in such a way as to affect the center of gravity of the wheel, depending on its position. The mass of the weight is constant and the pure effect of gravity on the mass (weight) does not change. So, to make a different effect on the wheel a weight must move. There are basics which cannot be ignored.
If a weight is hanging from the axle is has essentially disappeared from the wheel
The farther away from the axle the more effect that the weight has on the wheel in any position other than 12:00 and 6:00
The most power of a weight to effect rotation is at the 9:00 and 3:00 positions
The weight at 12:00 and 6:00 has no rotational power
as the weight moves from 12:00 to 1:00 it has more effect on the wheel
as the weight moves from 1:00 to 2:00 it has a little more effect on the wheel
IF a mass is put at the top of the wheel at the perfect balance point the wheel will not turn, but put it out of the center of balance, the wheel will turn
IF a mass has moved from the top to the bottom the potential energy stored in the mass has not changed only the position
The wheel has its own set of rules, and it will not respond to anything else
A lot of my early work was centered on the energy of the falling mass and its impact, but no net gain seemed to appear, as it is only the mass on the wheel that can effect its rotation or listing over, and in a ship the weights are typically moved below deck from side to side to bring the balance correction that is making the ship list .... lean.... over
So...... the power of the mass or weight is most effective on the rotation at the 3:00 position and as far from the axle as possible the opposite would be the the 9:00 position and close to the axle
GRAVITTEA
Thursday, October 27, 2016
The last 300 years
We are past the 300th year anniversary of the first public demonstration that Bessler provided
Countless man hours and investments have been spent in the search for the KEY elements that he never disclosed, The basic details he left, are in some places, more mysterious of how they connect together than has been humanly possible to derive. The easy way to make an out of balance wheel is to place weights a the top and just let them fall off at the bottom. The power of a configuration like this is substantial, but the problem of making them rise is not an easy one. However, simple his work was it still continues to drive us all Mad....... How was he able to not only sustain the rotation, but have it do work? How was he able to keep everyone from figuring it out...... He was, and still is a really clever guy for sure.
We are seeking to hear from John and his clue sleuthing chronicles. How wondrous the exposure will be for our planet, and mankind as a species.
Still seeking in all the ways that I can figure out
For I am a Perpetuum mobilist
GRAVITTEA
We are past the 300th year anniversary of the first public demonstration that Bessler provided
Countless man hours and investments have been spent in the search for the KEY elements that he never disclosed, The basic details he left, are in some places, more mysterious of how they connect together than has been humanly possible to derive. The easy way to make an out of balance wheel is to place weights a the top and just let them fall off at the bottom. The power of a configuration like this is substantial, but the problem of making them rise is not an easy one. However, simple his work was it still continues to drive us all Mad....... How was he able to not only sustain the rotation, but have it do work? How was he able to keep everyone from figuring it out...... He was, and still is a really clever guy for sure.
We are seeking to hear from John and his clue sleuthing chronicles. How wondrous the exposure will be for our planet, and mankind as a species.
Still seeking in all the ways that I can figure out
For I am a Perpetuum mobilist
GRAVITTEA
Wednesday, October 12, 2016
The answer I seek already lies within us.......
While we are seeking, it is a comfort to know that the answer to our question already exists. The energy that put that thought into the universe is still there. Rather than question how the answer will be revealed, I have faith that the right and perfect solution will appear. The Wisdom to discern is within me. The frequency of that energy can be heard by those who are on that frequency, because once that thought has been formed it is out there for all to access. Think about Columbus, some theories were that the world was flat, he did not believe that and spent years trying to get a sponsor for his trip to the New World. He set off on a voyage into the unknown waters of the Atlantic which he thought would lead him to the Eastern shore of Asia. When he arrived at the tiny islands of the Caribbean he felt pretty sure that he had found it. He made 4 complete voyages and showed others that path through the unforgiving sea and once they could see a way many were to follow
We have, at our disposal an enormous amount of information that was never before even dreamed of..
The information Hiway that we have at our fingertips helps us to understand the world that we live in and why things are the way they are
TO A CERTAIN POINT
There are still many mysteries yet to be solved and the information that Bessler was in possession of is just a thought away. One mechanism or one more test
Don't give up or give in we must find the information that he had
One observation that I made, is this ......
While a weight is falling it has vanished from the wheel The wheel has it"s own set of rules and it will not break them, that is why a falling weight cannot lift its own mass on the rising side of the wheel. The weight cannot disappear from the wheel, for when it does it leaves a void in the equation. No amount of impact can regain the energy that was lost when the weight was falling. It is only when the weight is attached or felt by the wheel can it impart it mass and the gravity that pulls it down to the earths core.
Bessler even said that there we no weights hanging from his axle...... because where ever the pivot of the arm is attached to the wheel that is where the wheel feels it
Looking forward to getting info from John about the solution soon
Do not fear we WILL figure this out
because
I am a Pertuum Mobilist
GRAVITTEA
While we are seeking, it is a comfort to know that the answer to our question already exists. The energy that put that thought into the universe is still there. Rather than question how the answer will be revealed, I have faith that the right and perfect solution will appear. The Wisdom to discern is within me. The frequency of that energy can be heard by those who are on that frequency, because once that thought has been formed it is out there for all to access. Think about Columbus, some theories were that the world was flat, he did not believe that and spent years trying to get a sponsor for his trip to the New World. He set off on a voyage into the unknown waters of the Atlantic which he thought would lead him to the Eastern shore of Asia. When he arrived at the tiny islands of the Caribbean he felt pretty sure that he had found it. He made 4 complete voyages and showed others that path through the unforgiving sea and once they could see a way many were to follow
We have, at our disposal an enormous amount of information that was never before even dreamed of..
The information Hiway that we have at our fingertips helps us to understand the world that we live in and why things are the way they are
TO A CERTAIN POINT
There are still many mysteries yet to be solved and the information that Bessler was in possession of is just a thought away. One mechanism or one more test
Don't give up or give in we must find the information that he had
One observation that I made, is this ......
While a weight is falling it has vanished from the wheel The wheel has it"s own set of rules and it will not break them, that is why a falling weight cannot lift its own mass on the rising side of the wheel. The weight cannot disappear from the wheel, for when it does it leaves a void in the equation. No amount of impact can regain the energy that was lost when the weight was falling. It is only when the weight is attached or felt by the wheel can it impart it mass and the gravity that pulls it down to the earths core.
Bessler even said that there we no weights hanging from his axle...... because where ever the pivot of the arm is attached to the wheel that is where the wheel feels it
Looking forward to getting info from John about the solution soon
Do not fear we WILL figure this out
because
I am a Pertuum Mobilist
GRAVITTEA
Thursday, September 15, 2016
The solutions lies within.........
Very interesting that our good British friend and blogger has posted that he has figured out the secret
Never really known for making wild and crazy conjecture, we all respect, admire, and value his ceaseless searching for the solution that we never got to see. I am so excited that he will have his workshop finished in a few months and will finally be in the position to build his working model. We all believe so strongly about the desperate need for the machine to appear.
If we can all send John our best energy to help him with his work and whatever requirements he might have, with encouragement and or finances if required we will all be better for it.
So.......... Bravo to the final display of his work
God Bless you all in your work
For I am
a Perpetuum Mobilist
GRAVITTEA
Very interesting that our good British friend and blogger has posted that he has figured out the secret
Never really known for making wild and crazy conjecture, we all respect, admire, and value his ceaseless searching for the solution that we never got to see. I am so excited that he will have his workshop finished in a few months and will finally be in the position to build his working model. We all believe so strongly about the desperate need for the machine to appear.
If we can all send John our best energy to help him with his work and whatever requirements he might have, with encouragement and or finances if required we will all be better for it.
So.......... Bravo to the final display of his work
God Bless you all in your work
For I am
a Perpetuum Mobilist
GRAVITTEA
Sunday, August 28, 2016
The obvious is not
Bessler's drawing of the 3 spokes and the statement "and are ye yet without understanding" is without a doubt and extremely curious statement
As a reference from some scriptures, the information that was being referenced was a known for all who had an understanding about the point.
That is not the case with his drawing, if it was it would have not taken....... now over 300 years to figure out. I am convinced that Karl would not have become involved if the mechanics that he viewed on the inside of the wheel were the secret that we all pursue. So then, it is just a matter of figuring out how to make an out of balance wheel. That was one of his statements
More weight on one side of the fulcrum than the other
The beat goes on, and I am feeling a sense that we are about to see a working wheel.
The is an energy that penetrates us all, and when a thought is released into that energy, if you are on the same frequency that the thought was released in....... you can have a knowing sent to you that is there for all to see, but only those in tune with the frequency
I am a Perpetuum Mobilist
GRAVITTEA
Bessler's drawing of the 3 spokes and the statement "and are ye yet without understanding" is without a doubt and extremely curious statement
As a reference from some scriptures, the information that was being referenced was a known for all who had an understanding about the point.
That is not the case with his drawing, if it was it would have not taken....... now over 300 years to figure out. I am convinced that Karl would not have become involved if the mechanics that he viewed on the inside of the wheel were the secret that we all pursue. So then, it is just a matter of figuring out how to make an out of balance wheel. That was one of his statements
More weight on one side of the fulcrum than the other
The beat goes on, and I am feeling a sense that we are about to see a working wheel.
The is an energy that penetrates us all, and when a thought is released into that energy, if you are on the same frequency that the thought was released in....... you can have a knowing sent to you that is there for all to see, but only those in tune with the frequency
I am a Perpetuum Mobilist
GRAVITTEA
Tuesday, July 26, 2016
There was a moment in time..............
Advance the Base of Knowledge
After having built 100 different configurations and learned a great deal
We must advance
I return to one of my earlier posts...... The weight of a single washer is still a Primary Configuration
When using my wheel, with my standard weight dropped in a uniform configuration, I consistently get the same amount of revolutions of 93 acting just as a flywheel
To continue the motion, the mechanism does not have to be a giant action packed adventure
If the wheel is activated, with the same uniform action, to continue the rotation with your finger is not a major even, but a very subtle little push........ very subtle little push and it will just keep going and going and going
It would not do much work but the continuation of rotation is the goal right now, but I can assure you that once we have penetrated the veil, to improve and make more power will be a simple action.
There was a moment in time, where a man flying was thought to be IMPOSSIBLE, and that to transplant a heart or do brain surgery was a figment of someones wild and far out imagination,
only those who think they can change the world are the ones who do I believe that Steve Jobs said something like that, and it rings true today Can you change the world, I believe that we can and make it a much better place to live
The patent office is still doing a lot of business, because New innovations are coming and will continue to come as dreamers still dream of doing it better Lets advance the Knowledge Base
I am a perpetuum mobilist
GRAVITTEA
Advance the Base of Knowledge
After having built 100 different configurations and learned a great deal
We must advance
I return to one of my earlier posts...... The weight of a single washer is still a Primary Configuration
When using my wheel, with my standard weight dropped in a uniform configuration, I consistently get the same amount of revolutions of 93 acting just as a flywheel
To continue the motion, the mechanism does not have to be a giant action packed adventure
If the wheel is activated, with the same uniform action, to continue the rotation with your finger is not a major even, but a very subtle little push........ very subtle little push and it will just keep going and going and going
It would not do much work but the continuation of rotation is the goal right now, but I can assure you that once we have penetrated the veil, to improve and make more power will be a simple action.
There was a moment in time, where a man flying was thought to be IMPOSSIBLE, and that to transplant a heart or do brain surgery was a figment of someones wild and far out imagination,
only those who think they can change the world are the ones who do I believe that Steve Jobs said something like that, and it rings true today Can you change the world, I believe that we can and make it a much better place to live
The patent office is still doing a lot of business, because New innovations are coming and will continue to come as dreamers still dream of doing it better Lets advance the Knowledge Base
I am a perpetuum mobilist
GRAVITTEA
Subscribe to:
Posts (Atom)
